New 1830 Air Hoe Drill

Planting
REQUEST A QUOTE
REQUEST A QUOTE
Key Features
  • Positive depth control features and options
  • Choice of ground-engaging openers
  • Longer machine life with flexible frame
  • Remote height sensors

More Info

Features

Positive depth control features and options

Setting depth is one of the most critical adjustments an operator will make to a seeding tool. John Deere understands every operator needs dependable, repeatable depth control that's easily adjustable. Not every producer agrees on how to make it. That is why John Deere provides a choice of two depth control options on the 1830 and 1835.

Mechanical depth shims are repeatable and reliable
Adjusting mechanical depth shimsAdjusting mechanical depth shims

Often-heard are comments from producers who say they prefer the positive mechanical depth control offered by the 1820. This popular concept is base equipment on the 1830 and 1835 air hoe drills. 

 

Two indexed depth shim packs on the mainframe are not only easy to set, but reduce the number of adjustment sites over previous designs by up to 60 percent.

Less time adjusting means more time seeding.

 

TouchSet™ depth control

Changing field conditions such as moisture levels and soil types can make setting depth a challenge.  TouchSet depth control makes adjusting depth in response to changing field conditions easy and profitable. On 8R and 9R Series tractors, the operator uses selective control valve (SCV) #1 and the SCV TouchSet control panel to perform all the depth control functions from the seat. Considering yield penalties of 5 percent due to seeding 2.5 cm (1 in.) too deep or too shallow, the convenience of in-cab adjustment pays nicely.

 

NOTE: Repeatability is +/- 6 mm (0.25 in.) to preset depth. If your seeding operation requires accuracy greater than +/- 6 mm (0.25 in.), the use of shim packs is recommended.

Remote position sensorRemote position sensor
Electrical connectorElectrical connector

A remote position sensor (1) is located at the rear of the drill; electronically monitors the positions of the implement.

 

An electrical connector is used for easy hookup of TouchSet depth control sensor on the implement to the tractor system (8R Tractor illustrated).

 

NOTES:

  1. For use with all 8R and 9R (or older models) Series John Deere tractors.
  2. TouchSet depth control requires additional tractor parts for hookup; see appropriate tractor section in this Sales Manual.

     

1830

Code

Bundle

Description

2500

  

Positive mechanical depth control

2505

 

TouchSet depth control plus positive mechanical depth control

 

1835

Code

Bundle

Description

2510

 

Positive mechanical depth control with active hydraulic down-pressure system for separate fertilizer placement (SFP)

2515

 

TouchSet depth control and positive mechanical depth control with active hydraulic down-pressure system for SFP

 

Control armControl arm
CommandCenter™CommandCenter™

How does it work? The operator uses the TouchSet (SCV setup panel) to set or change the operator depth.

  • With the implement nine-pin connector connected to the tractor, start the tractor; a P will appear in the window of the control panel under SCV #1.
  • The remote sensor located on the rockshaft monitors position of the implement.
  • After operating depth is measured at the ground engaging tool and the desired depth obtained, press the lower set button on the control panel. That depth is now set.
  • On-the-go depth changes can be made by touching the set button to select a new depth.
  • Implement raise height selection uses the upper set button on the control panel to preset the distance the implement is raised above the operating depth.

Preset the raise height to:

  • Take out wheel tracks on headlands
  • Limit raise height for waterway crossings
  • Manual depth override capacity
Reduce transport height

Transporting large machines on public roads can be a little stressful. Passing motorists, mailboxes, overhead lines, and trees can all contribute to potential hazards. 

With so much to focus on, the 1830 Air Hoe Drill operator should not have to worry about openers engaging the pavement when lowering a machine to clear an overhead obstacle. 

With the optional transport height reduction feature, the operator does not need to worry. This handy feature can also serve to set the height for storage inside.

How it works
Transport height reduction assemblyTransport height reduction assembly

Simply setting the pin in the appropriate hole will stop the machine from lowering when the openers are a safe distance above the pavement. 

The operator can focus on the overhead obstacle and other hazards such as passing motorists near the machine. This can prevent a potentially damaging encounter with the road surface or even an accident.

Focused on proper air hose routing
Primary hose routing
Clamps secure primary air hoseClamps secure primary air hose

Considerable attention has been given to routing primary seed and fertilizer hose. Reducing sharp bends and eliminating rub points serve to increase hose life and reduce the chance of downtime and skips resulting from holes in the hose. 

 

Additionally, improved clamping and securing methods have been developed specifically for the 1830 and 1835 to maintain hose routing and reduce hose wear.

 

Hoses are routed at the factory. To expedite dealer setup and ensure proper primary air hose positioning, the 1830 and 1835 incorporate quick couplers at wing and mainframe section joints.

Secondary hose routing
Clamps secure secondary air hoseClamps secure secondary air hose

Consistent seed and fertilizer delivery to the opener depends on proper secondary air hose routing. John Deere has adopted innovative clamping methods to ensure hoses maintain their shape and stay clear of frame components that could potentially cause premature wear.

Choice of ground-engaging openers
Knife bodies and points
Knife bodyKnife body
Knife body with 10 cm (4 in.) pointKnife body with 10 cm (4 in.) point

Many producers enjoy the moisture-saving benefits of low-disturbance seeding. To make it easier for them to reap the rewards of low-disturbance seeding, factory-installed knife bodies are available for 1830 and 1835 Drills.

The knife bodies are available in 2.5 cm (1 in.) or 10 cm (4 in.) spread points. 

Use the 2.5-cm (1-in.) point for low disturbance or, if a wider spread pattern is desired to increase seedbed utilization, use the 10-cm (4-in.) point. The points can be quickly changed with a single roll-pin fastening system and feature carbide tips to ensure long life. 

The knife bodies also feature a positive hose retention system with provisions for a hose clamp to hold the hose in place.

These knife bodies may not perform as designed in wet, sticky soil conditions.

NOTE: Points and roll pins are not included. Points and roll pins are available through Service Parts.

Perma-Loc™ spoons and sweeps

Perma-Loc spoons and sweeps from John Deere offer reduced maintenance and cost savings. How? The Perma-Loc design enables a change out up to five times faster than traditional bolt-on components.

 

What about opportunities to save cash? With Perma-Loc spoons and sweeps, there's no more purchasing hardware each time spoons are changed out. This can save $309 USD list price when changing out the spoons on a 18.60-m (60-ft) tool with 19-cm (7.5-in.) spacing. 

 

Save time and money and seed smart with John Deere Perma-Loc spoons or sweeps.

10-cm (4-in.) Perma-Loc spoon10-cm (4-in.) Perma-Loc spoon
10-cm (4-in.) Perma-Loc spoon10-cm (4-in.) Perma-Loc spoon

Shown is the 10-cm (4-in.) Perma-Loc spoon; 7.5-cm (3-in.) spoons are also available. 

Spoons are not included in base price and must be ordered separately. 

Below is the seedbed profile that can be expected if using a 10-cm (4-in.) spoon in conventional tillage with the 1835 Separate Fertilizer Placement (SFP). 

10-cm (4-in.) Perma-Loc spoon10-cm (4-in.) Perma-Loc spoon
#
  1. Tilled soil
  2. Disturbed soil packed over seed row
  3. 25.4 cm (10 in.)
  4. Separate fertilizer placement nitrogen
  5. 10 cm (4 in.)
  6. 50.8 cm (20 in.)
  7. Seed
  8. Seed-placed phosphorus
30-cm (12-in.) Perma-Loc sweep and boot30-cm (12-in.) Perma-Loc sweep and boot
Seedbed profile - 1830 and 30-cm (12-in.) Perma-Loc sweepsSeedbed profile - 1830 and 30-cm (12-in.) Perma-Loc sweeps
  1. Disturbed soil packed over seed row with 14-cm (5.5-in.) semi-pneumatic packer
  2. 25.4 cm (10 in.)
  3. Tilled soil
  4. Seed-placed phosphorus
  5. Seed-placed nitrogen
  6. Seed
  7. 17.8 cm (7 in.)
  8. Seed floor created by sweep
Perma-Loc removal tool
Perma-Loc removal toolPerma-Loc removal tool

This handy Perma-Loc removal tool should be ordered for each drill ordered with Perma-Loc components.

Codes for ground-engaging openers

 

Code 

Bundle 

Description

5000

 

Perma-Loc clip and seed boot for TruPosition™ standard

  • Not compatible with double-shoot air packages on 1830

5001

 

Perma-Loc clip and seed boot for TruPosition openers with sweeps

  • Not available on 1835

5005

*

Knife body for TruPosition standard

5006

 

Knife body with 2.5 cm (1 in.) tip for TruPosition openers 

5007

 

Knife body with 10 cm (4 in.) tips for TruPosition openers

5010

*

Less ground-engaging tools and seed boot for TruPosition and spring-cushion openers

Longer machine life with flexible frame
Side-to-side flexibility demonstrated by 1830Side-to-side flexibility demonstrated by 1830

Most producers view purchasing a seeding system as a long-term investment. The life requirement of these robust machines is four times longer than previous models. That is why the John Deere seeding group has built even more durability into the 1830 and 1835 Air Hoe Drills. 

 

An advanced and rigorous testing program has proven the machine durability to the extent that John Deere now offers a three-year frame warranty with each 1830 and 1835 that rolls out of the factory.

Robust ball jointsRobust ball joints
Cast rank tube connectorsCast rank tube connectors

Robust ball joints connect strong fore-aft tubes to 100- x 100-mm (4- x 4-in.) rank tubes, which are joined to one another by pivoting rank connectors. Both the mainframe and wing sections share this durable construction that enables the frame to flex diagonally, relieving stress on solid frame members and avoiding frame failures.

 

Seed smart with confidence that the 1830 and 1835 will endure your field conditions.

Seed depth uniformity
Diagonal frame flexibility keeps openers engagedDiagonal frame flexibility keeps openers engaged

Producers are more attuned to the importance of seed depth than ever before. A uniform-looking field is not the only goal; yield is too. Proven yield penalties across the world range from 5 percent to 25 percent, depending on depth variance.

 

The 1830 and 1835 feature diagonal mainframes and wing flexing – helping openers maintain their depth over uneven terrain.

Five tire options for 1830 Air Hoe Drills

The correct tires are critical to the overall performance and productivity of an air hoe drill. The John Deere Seeding Group recognizes the wide variance in conditions and tire needs around the world. Five tire options are provided for the 1830 Air Hoe Drill. 

 

To select the appropriate tire, consider the discussions and matrixes below. 

 

Wheels in base equipment on 1830 mainframe are:

  • Dual front caster wheels
  • Dual rear transport wheels 

  Equip the wing sections with duals in the following situations:

  • Maximum flotation is required for wetter soils or conditions
  • No requirement to have openers seeding outboard the outer wing caster tire
  • Rough field conditions that could lead to potentially inconsistent seed depth
12.5L-15 tires - base equipment for 1830
12.5L-15 tire12.5L-15 tire

The 12.5L-15 tire (code 2210 or 2215) brings load-carrying capacity and puncture resistance.

For additional capabilities in the following situations, consider optioning up to high-flotation, wide-profile knobby tire option (code 2220):

  •      Transporting on soft, rural roads
  •      Operating in generally wetter, softer field conditions
  •      Additional puncture resistance is required
33x15.5-16.5 and 31x13.5-15 high-flotation tires
33x15.5-16.5 tire33x15.5-16.5 tire
31x13.5-15 tire31x13.5-15 tire

The high-flotation tires (code 2220) provide the best performance in all categories with the exception of tire overlap (pass-to-pass) and replacement tire considerations. The size of the machine will depict whether the mainframe will receive 33x15.5-16.5 or 31x13.5-15 size tires (see matrix below).

Tire selection by base code and option code

What tires are included with each base code and option code? This can be a complicated question and present unwarranted confusion. Each machine configuration is equipped with the tire that is meets the minimum load carrying capacities required of the machine size. Below is a chart that describes the tire that accompanies each code.

 

 

Code

  

2210

2215

2220

Wing configuration

 

Single

Dual

Dual

Model/size

1830-34
(10.40 m)

Mainframe duals

12.5L15 FI LR D

12.5L15 FI LR D

31x13.5-15 10 PR

 

Wing

12.5L15 FI LR D

12.5L15 FI LR D

31x13.5-15 10 PR

1830-41
(12.50 m)

Mainframe duals

12.5L15 FI LR D

12.5L15 FI LR D

31x13.5-15 10 PR

 

Wing

12.5L15 FI LR D

12.5L15 FI LR D

31x13.5-15 10 PR

1830-50
(15.20 m)

Mainframe duals

12.5L15 FI LR D

12.5L15 FI LR D

33x15.5-16.5 10 PR

 

Wing

12.5L15 FI LR D

12.5L15 FI LR D

31x13.5-15 10 PR

1830-61 (18.60 )

Mainframe duals

12.5L15 FI LR F

12.5L15 FI LR F

33x15.5-16.5 10 PR

 

Wing

12.5L15 FI LR D

12.5L15 FI LR D

31x13.5-15 10 PR

1835-41,50 (12.50 & 15.20 m

Mainframe duals

12.5L15 FI LR D

12.5L15 FI LR D

33x15.5-16.5 10 PR

  

Wing

12.5L15 FI LR D

12.5L15 FI LR D

31x13.5-15 10PR

1835-61
(18.60 m)

Mainframe duals

12.5L15 FI LR F

12.5L15 FI LR F

33x15.5-16.5 10 PR

 

Wing

12.5L15 FI LR D

12.5L15 FI LR D

31x13.5-15 10 PR

 

To determine which code is most appropriate for a given situation, see the chart below, which outlines some considerations for tire package selection.

Tire code suitability by application

Code

 

2210

2215

2220

Wing configuration

 

Single

Dual

Dual

Selection criteria

Application

   

Load rating

Extensive road transport or heavy options

Best

Best

Better

Flotation - Road transport

Transport on soft rural roads

Good

Good

Best

Flotation - Field edges

Operation around field wet spots

Good

Better

Best

Puncture and stubble resistance

Road and field hazards or tough stubble

Better

Better

Best

Wing operation stability

Operation in rough fields

Good

Best

Best

Overlap with previous pass

Operation without guidance systems

Best

Better

Good

Availability of replacement tires

Operation far from retail centers

Better

Better

Good

Cost of replacement tires

 

Better

Better

Good

Hydraulic hose routing

Pinched hydraulic hoses lead to costly downtime. John Deere is aware producers expect machine reliability and a visually pleasing appearance when investing their hard-earned money in a new seeding tool. That's why the John Deere seeding group has placed extra emphasis on securely routing hydraulic hoses on the 1830 and 1835.

P-clamp P-clamp
D-ringD-ring

All 1830 and 1835 frames are manufactured with weldments to accommodate hose securement sites like the P-clamp and D-ring shown above.

Velcro strap and protective sleeveVelcro strap and protective sleeve

Innovative solutions like this Velcro® strap and protective sleeve ensure the reliability of the 1830 and 1835 measure up to John Deere standards. A machine-down repair that takes two hours to fix can mean over 20 ha of lost seeding time.  

At a custom rate of $12 per hour, that's at least $600 of lost revenue, or lost yield, if seeding is delayed past mid May (wheat) for many locations. 

 

Velcro is a U.S.-registered trademark of Velcro Industries B.V.

1830 and 1835 Air Hoe Drills hydraulic lift circuit

The 1830 and 1835 feature a simplified hydraulic system due to a common rockshaft design in the lift circuit. Not only does this tie all sections together ensuring consistent depth from mainframe to wing, it also eliminates 50 percent to 67 percent of the hydraulic cylinders, reducing the chance of hydraulic failure.

Frame lift cylinderFrame lift cylinder
Common rockshaft designCommon rockshaft design
  • No rephasing of hydraulic cylinders
  • Fewer hydraulic components and hoses to maintain
  • Seed with confidence that all air hoe drill sections are seeding at the same depth

Specifications

Compare >>>

Select up to 2 models to compare specifications

John Deere1830 Air Hoe Drill
Add Model
Add Model
Dimensions
Road clearance with sweep 38.1 cm
15 in.
Transport width 10.36-m; 12.49-m; 6.19-m (3-section models); 15.24-m; 18.59-m; 6.19-m (5-section models)
34-ft.; 41-ft.; 20-ft. 4-in. (3-section models); 50-ft.; 61-ft.; 20-ft. 4-in. (5-section models)
Nominal mainframe width (between wing-fold pivots) 4.19 m
13.75 ft
Number of seed openers Openers link
Spacing and width #1 Working width
10.5 m
34, 4.5 ft, in.Transport height with harrow
5.05 m
16.57 ftTransport height without harrow
5.02 m
16.48 ftMinimum temporary height reduction with sweeps
45.72 cm
18 in.Weight
10,230 (weight with typical options) kg
22,550 (weight with typical options) lb
Spacing - 7.5 in.
Width - 34 ft
Spacing and width #2 Working width
12.4 m
40-ft. 7.5-in. ft, in.Transport height with harrow
5.9 m
19.36 ftTransport height without harrow
5.9 m
19.36 ftMinimum temporary height reduction with sweeps
457 mm
18 in.Weight
11,250 (weight with typical options) kg
24,800 (weight with typical options) lb
Spacing - 7.5 in.
Width - 41 ft
Spacing and width #3 Working width
15.4 m
50, 7.5 ft, in.Transport height with harrow
4.97 m
16.31 ftTransport height without harrow
4.97 m
16.31 ftMinimum temporary height reduction with sweeps
50.8 cm
20 in.Nominal inner wing width (between wing-fold pivots)
3.08 m
10.1 ftWeight
14,900 (weight with typical options) kg
32,850 (weight with typical options) lb
Spacing - 7.5 in.
Width - 50 ft
Spacing and width #4 Working width
17.3 m
56, 10.5 ft, in.Transport height with harrow
5.72 m
18.76 ftTransport height without harrow
5.72 m
18.76 ftMinimum temporary height reduction with sweeps
50.8 cm
20 in.Nominal inner wing width (between wing-fold pivots)
3.64 m
11.93 ftWeight
16,010 (weight with typical options) kg
35,300 (weight with typical options) lb
Spacing - 7.5 in.
Width - 57 ft
Spacing and width #5 Working width
18.1 m
59, 4.5 ft, in.Transport height with harrow
18.76 ft
5.72 mTransport height without harrow
18.76 ft
5.72 mMinimum temporary height reduction with sweeps
50.8 cm
20 in.Nominal inner wing width (between wing-fold pivots)
3.82 m
12.55 ftWeight
16,330 (weight with typical options) kg
36,000 (weight with typical options) lb
Spacing - 7.5 in.
Width - 61 ft
Spacing and width #6 Working width
10.2 m
33, 4 ft, in.Transport height with harrow
4.84 m
15.88 ftTransport height without harrow
4.85 m
15.91 ftMinimum temporary height reduction with sweeps
457 mm
18 in.Weight
9,340 (weight with typical options) kg
20,600 (weight with typical options) lb
Spacing - 10 in.
Width - 34 ft
Spacing and width #7 Working width
12.2 m
40 ftTransport height with harrow
5.86 m
19.22 ftTransport height without harrow
5.79 m
19.01 ftMinimum temporary height reduction with sweeps
457 mm
18 in.Weight
10,330 (weight with typical options) kg
22,775 (weight with typical options) lb
Spacing - 10 in.
Width - 41 ft
Spacing and width #8 Working width
15.2 m
50 ftTransport height with harrow
5.04 m
16.53 ftTransport height without harrow
5.04 m
16.53 ftMinimum temporary height reduction with sweeps
508 mm
20 in.Nominal inner wing width (between wing-fold pivots)
3.08 m
10.1 ftWeight
13,540 (weight with typical options) kg
29,850 (weight with typical options) lb
Spacing - 10 in.
Width - 50 ft
Spacing and width #9 Working width
17.3 m
56, 8 ft, in.Transport height with harrow
5.54 m
18.17 ftTransport height without harrow
5.54 m
18.17 ftMinimum temporary height reduction with sweeps
508 mm
20 in.Nominal inner wing width (between wing-fold pivots)
3.64 m
11.93 ftWeight
14,670 (weight with typical options) kg
32,350 (weight with typical options) lb
Spacing - 10 in.
Width - 57 ft
Spacing and width #10 Working width
18.8 m
61, 8 ft, in.Transport height with harrow
5.98 m
19.62 ftTransport height without harrow
5.91 m
19.4 ftMinimum temporary height reduction with sweeps
483 mm
19 in.Nominal inner wing width (between wing-fold pivots)
4.14 m
13.59 ftWeight
15,340 (weight with typical options) kg
33,825 (weight with typical options) lb
Spacing - 10 in.
Width - 61 ft
Spacing and width #11 Working width
12.7 m
41, 8 ft, in.Transport height with harrow
5.99 m
19.66 ftTransport height without harrow
5.99 m
19.66 ftMinimum temporary height reduction with sweeps
457 mm
18 in.Weight
9,640 (weight with typical options) kg
21,250 (weight with typical options) lb
Spacing - 12.5 in.
Width - 41 ft
Spacing and width #12 Working width
15.2 m
50 ftTransport height with harrow
5.38 m
17.65 ftTransport height without harrow
5.38 m
17.65 ftMinimum temporary height reduction with sweeps
508 mm
20 in.Nominal inner wing width (between wing-fold pivots)
3.08 m
10.1 ftWeight
12,450 (weight with typical options) kg
27,450 (weight with typical options) lb
Spacing - 12.5
Width - 50 ft
Spacing and width #13 Working width
17.8 m
58, 4 ft, in.Transport height with harrow
5.69 m
18.67 ftTransport height without harrow
5.69 m
18.67 ftNominal inner wing width (between wing-fold pivots)
3.82 m
12.55 ft
Spacing - 12.5 in.
Width - 57 ft
Spacing and width #14 Working width
19 m
62, 6 ft, in.Transport height with harrow
5.99 m
19.67 ftTransport height without harrow
5.99 m
19.67 ftMinimum temporary height reduction with sweeps
483 mm
19 in.Nominal inner wing width (between wing-fold pivots)
4.14 m
13.59 ftWeight
14,320 (weight with typical options) kg
31,575 (weight with typical options) lb
Spacing - 12.5 in.
Width - 61 ft
Spacing and width #15
Spacing and width #16
Spacing and width #17
Spacing and width #18
Spacing and width #19
Seed Opener
Type #1 Spacing
19.05, 25.40, 31.75 cm
7.5, 10, 12.5 in.Dimensions
31.75 x 50.8 x 711 mm
1.25 x 2 x 28 in.Trip force
2.45 kN
550 lb
Tru-Position - 51 degree (angle)
Type #2 Spacing
19.05, 25.40, 31.75 cm
7.5, 10, 12.5 in.Dimensions
31.75 x 50.8 x 711 mm
1.25 x 2 x 28 in.Trip force
1.55 kN
350 lb
Tru-Position - 51 degree (angle)
Type #3 Spacing
19.05, 25.40, 31.75 cm
7.5, 10, 12.5 in.Dimensions
19.05 x 44.45 x 610 mm
.75 x 1.75 x 24 in.Trip force
0.35 to 1.11 kN
80 to 250 lb
Spring cushion hoe
Penetration force
Underframe clearance 71.12 cm
28 in.
Fertilizer Opener
Type #1
Type #2
Mainframe
Centerframe width 4.19 m
13, 9 ft, in.
Cross members 10.16 x 10.16 cm
4 x 4 in.
End tubes
Hitch 10.16 x 10.16 x 0.95 cm
4 x 4 x 3/8 in.
Hitch category Category 4, pin - 50 mm
Category 4, pin - 2 in.
Seeding tool depth control Adjustable mechanical stop
Mainframe and wing flexibility Diagonal flex
Fore-Aft Dimensions
Length Hitch pin to rear of transport wheels
9.95 m
32-ft. 8-in.Lateral frame clearance, opener to opener
76.2 cm
30 in.Fore-aft frame clearance between ranks
73.66 cm
29 in.Front of front cross member to front of rear cross member (4 ranks)
2.21 m
87 in.
9.95 m
32-ft. 8-in.
Harrow
Type Optional 2-bar tine-tooth
Press Wheels
Size Steel
3x21-in. (34.7 lb.) on 7.5,10,12.5-in. spacing, 4x22-in. (35.9 lb.) on 10,12.5-in. spacingSemi-pneumatic
3x21-in. (37.2 lb.) on 7.5,10,12.5-in. spacing, 4x21-in., 5.5x21 (41.8 lb., 51.6 lb.) on 10,12.5-in. spacingSplit
81.2 lb
Tires
Tire specifications Tire link
Tractor Hydraulic Requirements
Minimum SCVs 2
Tractor hydraulic circuit requirements One selective control for frame lift; one selective control for wing fold and transport wheels
Tractor hydraulic pressure requirement 2000 PSI min (34-ft. - 41-ft.); 2200 PSI min (50-ft.); 2500 PSI min (57-ft. -61-ft.)
Tractor Horsepower Requirements
34-ft. 235
41-ft. 275
50-ft. 350
57-ft. 400
61-ft. 425
Tractor Compatibility
On-line compatibility guide Compatibility link

Accessories and Attachments

Wheel Equipment

One 12.5L-15 In. F1 Load Range D Flotation Tire and 6 Bolt Wheel - BA30125

Includes a spare tire, wheel and tire mounting bracket.

One 31-13.5 In. - 15 12PR Flotation Tire on 6 Bolt Wheel - BA30763

Includes a spare tire, wheel and tire mounting bracket.

Powered by Dealer Web Central